Location Of Controls; Main Unit - SOUNDMASTER highline UR2160 Manual Del Usuario

LOCATION OF CONTROLS

MAIN UNIT

1) Standby LED indicator
2) CD tray
3) Aux-in jack
4) Remote handset stick place
5) USB Socket
6) CD tray open/close button
7) Play/Pause button
8) Stop St-Mono button
/
9) Skip/Tuning Up
10) Folder/Pre-Up/Down button
11) Memory/Clock-Adjust button
12) Remote sensor
13) LCD display
14) Volume button
15) On/Standby button
16) Function button
17) Preset EQ button
18) Display/ID3/RDS mode button
19) Timer button
20) Sleep button
21) Play Mode/RDS search button
22) Speaker
23) Backup battery compartment
24) FM wire antenna
25) AC cord
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this
unit off while operating other
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Backup battery installation
•
This device provide a battery backup system to memory your clock time, preset
memory of tuner and timer once the AC source was interrupted. Follow the engraved
marking in the compartment to install 2pcs "AA " size battery(not included) with the
correct direction to the battery compartment. Then cover the battery door.
•
Alkaline type battery recommended for long life performance.
•
Wrong direction battery installation will cause explosion and damage the unit.
/Down button
radio devices
E'
hZ