Turning The Camera On/Off; Changing Camera Modes - Coby Snapp CAM4002 Manual De Instrucciones

Install the memory card by inserting it gently

into the card slot on the bottom of the video
camera. Push the card until it clicks into place.
Make sure the card is properly aligned as indi-
cated by the marking next to the card slot.
To release and remove the card, press the card in;

it will spring out of the slot. Grasp the card by its
edge to remove it.
To avoid data corruption, turn off the digital
video camera before inserting or removing
a memory card.
Avoid touching the gold contacts of the
memory card.
Do not attempt to insert objects other than
an SD or SDHC memory card into the card
slot. A compatible memory card should fit
easily into the card slot; if you encounter
resistance, check the alignment of the card.
Do not attempt to force the card in.
Page 10
All manuals and user guides at all-guides.com

Turning the Camera On/Off

Press and hold to turn the camera on. Press
to turn the camera off.
To save power, the camera will turn itself
off automatically after one minute when
not in use.

Changing Camera Modes

Your video camera has two modes: Record and
Playback. Press to toggle between them.
Camera
Icon
Mode
Record
Playback
Function
Take photos and record
movies.
Review movie and photo
files.
Getting Started