Coby Snapp CAM4002 Manual De Instrucciones página 38

camera does not power on.
Check that the rechargeable battery has been

installed correctly. The text on the battery
should face up and be legible, and the gold
contacts should face left.
The battery level may be low. Connect the

camera to a computer to charge.
the camera does not take pictures/video.
The camera's memory or memory card may be

full. Delete several files and try again.
The memory card type may not be supported.

Make sure that you are using an SD or SDHC
memory card 16GB or less in size.
The memory card format may not be sup-

ported. Make sure that you are using a FAT-
formatted card.
image is blurry or out of focus.
Blurry images or video may result when the

camera is not held steady during recording.
Hold the camera steady and try again.
Page 38
All manuals and user guides at all-guides.com
Blurry images or video may result when there is

not enough light on the subject. Try recording
in a brightly lit location.
recorded images are not saved in memory.
Images will not save if the camera is turned off

before data has finished processing. Be sure
to allow adequate time for the image to save
completely before turning off the video camera.
Troubleshooting & Support