Connecting To A Tv - Coby Snapp CAM4002 Manual De Instrucciones

connecting to a tv

 Â
To view your video and photo files on a bigger screen, use the included A/V cable to connect your camera
to a television.
if your tv has composite video input
(yellow/red/white connectors):
1. Locate the Composite Video input connectors
on the TV.
Connect the cable's yellow RCA plug to the
—
Composite Video In jack of the TV.
Connect the cable's red RCA plug to the red
—
Audio In jack of the TV.
2. Connect the cable's mini plug to the A/V output
jack located on the camera.
3. Turn on the TV. Set the TV's input source mode
to display the Composite Video signal.
Connecting To A Tv Connecting To A Tv
All manuals and user guides at all-guides.com
when the camera is connected to your tv:
1. Turn on the camera; the camera will automati-
cally switch to play-
back mode and the
camera screen will turn
off.
2. Use the playback
mode controls to play
videos or view photos
on the TV.
If the TV source mode has been set properly,
you will see the camera's display on the TV
screen. If you need help setting the TV source
mode, please refer to the documentation
provided with your TV.
T V
W R Y
Page 23 Page 23