Black and Decker BSAH1215AC Manual De Instrucciones página 29

INSTALLATION INSTRUCTIONS
• After finishing connecting the couple of the
quick connectors, pass drain hose and the
refrigerant pipes through the wall hole.
NOTE: The quick connector parts must be
placed outside of room. Using wall hole
sleeve, cap and neoprene to seal the
wall hole.
• In order to prevent the quick connector parts
from being exposed in the air, the sound
deadening pads are supposed to be used
during installation, see Fig. 4.
• Wrap up the quick connectors with the sound
deadening pads, pack down the pads solid as
tightly as shown in Fig. 5.
• At last, use the tape to wrap the connection
pipe and connecting cable together.
Connecting the Refrigerant Pipe to Outdoor Unit
CAUTION –
• The outdoor unit as shown in Fig.6.
• Do not remove the plastic seals from the outdoor unit and the
appropriate the refrigerant pipes until immediately before you
connect them, Fig.7.
For your safety, always wear goggles and work
gloves when connecting the pipes.
Page 29