REMOTE CONTROL INSTRUCTIONS
13. FAN ON
• The Fan On functions when the unit is turned off with the remote
control in COOL, DRY, or AUTO mode. It will operate in HEAT mode
(FAN mode for cool units only) with the internal fan running for ad-
ditional time before stopping. On excessive hot and humid days, extra
moisture is accumulated in the indoor Air Conditioner unit. The Fan On
function will continue to run after the unit is shut off for an additional
3 minutes to help get rid of any accumulative moisture.
• This function is not set in the factory. You may set it or cancel it at any
time you want as follows: With both the unit and remote control OFF,
point the remote control at the unit and press the "Fan On" button
once, the buzzer will sound 5 times, indication the function is on. Once
set, this function will remain valid except when the unit is turned off or
until it is cancelled.
• To cancel Fan On:
1. Power off the unit.
2. With both the unit and the remote control OFF, point the
remote control at the unit and press the Fan On button once.
The buzzer will sound 3 times indicating the function is can-
celled.
NOTE: With Fan On activated, it is advised not to turn ON the unit again
before it is fully OFF. Fan On function will be invalid when OFF
timer is set.
Page 41