Black and Decker BSAH1215AC Manual De Instrucciones página 30

INSTALLATION INSTRUCTIONS
• Align the refrigerant pipes correctly so that they line up with the
valves and are not stressed. Place the screw connector on the
refrigerant pipes just on to the thread on the outdoor unit and
tighten the first few threads by hand, Fig. 8.
NOTE: The refrigerant pipes must be connected to the valves on the
outdoor unit with as little stress as possible.
CAUTION – Before you continue, it is essential that you read the
•
Now tighten the bottom screw connector first and then the top screw connector
using the open-ended spanner. Hold the points marked
open-ended spanner and turn the nuts only at the points marked
an open-ended spanner ( Select the appropriate spanner according to the
dimensions of the connector). see Fig. 9.
Ensure that the screw connectors do not skew as you tighten them and work quickly.
See the table for the proper torque.
Page 30
following instructions carefully.
" "
using an
" "
using