General Features - Astralpool COMBO 27413 Manual De Instrucciones Y Funcionamiento

To get the maximum performance out of the filtration unit, users are advised to read the instructions
given below.
1. CHECK THE PACKING CONTENTS
The Combo filtration unit is packed in one box with the following contents:
A) Front module (fig. 1)
• Front module
• Front module rear fairing
• 2 DIN 571 M8x50 screws with corresponding washers and plugs for concrete
• 2 DIN 96 M6x40 screws with corresponding washers and plugs for concrete
• 2 rubber pads
B) Filtration equipment (fig. 2)
• Filtration equipment box
• Rear fairing of the box
• 2 DIN 7982 3.9x16 screws to secure the fairing
• Connection for the pump drain (located within the filtration equipment, to be connected)
• Filtration box drain
• Bag with 3 Ø 50 three-part connections
• Pump manual
• 2 DIN 7985 M8x20 screws to fix the cover

1. GENERAL FEATURES

The Combo filtration unit is a filtering system for swimming pool water, consisting of two basic elements: the
front module which is placed on the wall of the swimming pool and a filtration unit which contains the pump,
filters and control panel. These elements are connected to one another by 3 conduits and 1 electric cable.
Description of the components (fig. 3 and 4)
1 Body of the front module
2 Rear fairing
3 Lamp
4 Access cover to skimmer
5 Hinged cover of the skimmer
6 Connection for vacuum head hose
7 Nozzles to drive filtered water
8 Body of the filtration box
9 Top cover of the box
10 Cowling for the side closure
11 Pump
12 Filter
13 Valve for the vacuum head
14 Valve for the filter or drain
15 Control panel
16 Residual drain
17 Pump drain
18 Transformer
19 Lamp cable packing gland
20 Pneumatic switch
21 Tension cable
22 Lock
The compact filtration system can perform four functions within a single unit:
• Filters swimming pool water.
• Provides a connection for a vacuum head.
• Empties the pool.
• Provides swimming pool lighting.
All manuals and user guides at all-guides.com
3
ENGLISH