Functions; Auto Power Off (Sleep Mode); Change Thermocouple Type - Amprobe TMD90A Manual Del Usuario

Idiomas disponibles

WCaution

Read all Safety Information before using this

thermometer.

Functions

The TMD90A shuts off automatically approximately 20 minutes after

being turned on. For recording or operating over longer periods of time

you can disable the sleep mode by pressing

simultaneously while powering on. When "n" then appears in the center

of the screen you can release the On button. Auto power off is disabled

when you turn off the meter.

Press

and

simultaneously for 2 or more seconds until K

appears. Press the

button the type of probe cycles through K

(the default), J, T, R, S, and E types. The current mode is displayed on

the left side of the LCD. press

the screen.

l.pdf 9

All manuals and user guides at all-guides.com

and

, an "S" will appear in the center of

3/23/2007 3:22:49 PM

Tabla de Contenido