Virtual Surround; Digital Out - Marantz DV8400 Guia Del Usuario

All manuals and user guides at all-guides.com
7 DVD Setup Menu
MPEG Out
• Default setting: MPEG 3 PCM
You only need to make this setting if you connected the
player to another component (AV amplifier, etc.) using
one of the digital outs.
If your AV amplifier (or other connected component)
is compatible with MPEG audio, set this to MPEG,
otherwise set it to MPEG 3 PCM (MPEG audio is
converted to more compatible PCM audio). Check
the manual that came with the other component if
you're unsure whether it is MPEG audio compatible.
Audio1 A2 Video1
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out

Digital Out

SACD Playback
Move
Digital Out
• Default setting: On
If at any time you need to switch off the digital audio
output, set this to Off, otherwise leave it On. Note
that you can't switch on/off the optical and coaxial
outputs individually.
Audio1 A2
Video1
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Move
Super Audio CD Playback
• Default setting: 2ch Area
Super Audio CD discs can be divided up into several
different areas – stereo audio, Multi channel audio
and, for hybrid Super Audio CDs, standard CD audio.
The Super Audio CD Playback setting enables you to
select which area of the disc you want to play.
Audio1 A2 Video1
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Move
Note
If you select an area that isn't on the disc loaded, a
different area of the disc will play. For example, if you
choose standard CD audio but the disc loaded is not
a hybrid Super Audio CD, the stereo Super Audio CD
audio will play.
42
General
V2 Language
— Off
Dolby Digital
—
DTS 3 PCM
—
— Down Sample On
MPEG
MPEG 3 PCM
2ch Area
—
SETUP
Exit
General
V2 Language
— Off
— Dolby Digital
DTS 3 PCM
—
— Down Sample On
MPEG 3 PCM
—
On
Off
SETUP Exit
V2 Language General
— Off
— Dolby Digital
DTS 3 PCM
—
— Down Sample On
2ch Area
Multi-ch Area
CD Area
Exit
SETUP

Virtual Surround

• Default setting: Off
If you connected your DVD player using only the
stereo analog outputs and set Audio Out (see below)
to 2 Channel, you can simulate surround sound by
setting Virtual Surround to TruSurround.
Language General
A1 Audio2 Video1 V2
Virtual Surround — Off
Audio Out TruSurround
Speaker Setting
Gain Setting — Fix
CD Digital Direct — Off
Move SETUP
Note
• There is no effect when the audio source is DVD-
Audio, DTS or 96 kHz LPCM or during CD, MP3 or
Super Audio CD playback.
• The digital audio output level is reduced when
playing 2 channel Dolby Digital DVDs or Video CDs
with TruSurround selected. If you play a multichan-
nel Dolby Digital DVD with Dolby Digital to PCM
conversion (see page 41) and TruSurround
selected, there is no digital output.
• How good the surround effect is varies with the
disc.
TruSurround
TruSurround uses technology that simulates
multichannel surround sound using only two
speakers.
Exit