Harbor Breeze 40075 Manual De Instrucciones página 18

FINAL INSTALLATION
5. Carefully arrange the wires inside the switch housing
(F). Align the holes in the switch housing (F) with the
holes in the fitter plate portion of the motor housing
(E). Re-insert the switch housing screws (GG) and
tighten them securely.
Hardware Used
Switch Housing
GG
Screw
6. Locate switch housing screws (JJ) on the underside
of the switch housing (F) rim. Remove the fitter plate
screw (JJ) with a red dot and save it for later use.
Partially loosen the other two fitter plate screws (JJ).
Hardware Used
JJ
Fitter Plate Screw
7. Align the slotted holes in the light kit fitter (I) with the
loosened fitter plate screws (JJ) and twist the light kit
fitter (H) to lock it. Re-insert the fitter plate screw (JJ)
that was removed in the previous step and re-tighten
all three fitter plate screws (JJ) securely.
Hardware Used
JJ
Fitter Plate Screw
5
GG
x 3
F
6
JJ
x 3
7
JJ
x 3
18
Lowes.com/harborbreeze
E
E
F
F
H