Final Installation - Harbor Breeze 40075 Manual De Instrucciones

FINAL INSTALLATION

1. Locate the four canopy mounting screws (FF) on
the underside of the mounting bracket (C). Remove
the two canopy mounting screws (FF) closest to
the open end of the mounting bracket (C). Partially
loosen the other two canopy mounting screws (FF).
Hardware Used
Canopy Mounting
FF
Screw
2. Secure the canopy (B) with the previously removed
canopy mounting screws (FF) and securely tighten
all four screws (FF). Push the canopy cover (J) up
into the bottom of the canopy (B) until it is locked.
Notet
Closemount installation will not have the
downrod (A) and canopy cover (J).
Hardware Used
Canopy Mounting
FF
Screw
1
B
x 4
2
B
A
x 4
16
C
J
Lowes.com/harborbreeze
FF
FF