Harbor Breeze 40075 Manual De Instrucciones página 19

FINAL INSTALLATION
8. Connect the male plug from the switch housing (F)
to the female plug from the light kit fitter (H) and
ensure that the plugs connect tightly. Then install
three candelabra-base 40-watt max. bulbs (I) into the
sockets.
CAUTIONt When replacing bulbs, please allow the
bulbs and glass shade to cool down before touching.
9. Set the reverse switch, located on the switch housing
(F), to the left position for a downward airflow that
creates a wind chill effect or to the right position to
create an upward airflow that will help move hot air
off the ceiling.
For further information on the reverse switch, please
see Step 3 in the Operating Instructions section of
this manual.
8
H
9
19
Lowes.com/harborbreeze
F
I
H
F