Installation Instructions - HAMPTON BAY 828-359 Manual De Instrucciones

Thank you for purchasing this Hampton Bay interior track accessory. This
product has been manufactured with the highest standards of safety and quality.
FEATURES
:
1. White finish with black cover included for use with white or black track
sections.
2. Connects a track section to a junction box at the end of the track to supply
power.
3. All mounting hardware is included.
4. For use with Hampton Bay series white or black track system only.60Hz
120V.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit www.homedepot.com. Please reference SKU
828-359, UPC 008938271394.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
Ladder Safety Gloves
Goggles
PARTS INCLUDED FOR ASSEMBLY
(parts are not to scale):
x1 Black Canopy

INSTALLATION INSTRUCTIONS:

1. Before installing, disconnect power by turning off circuit breaker or
removing fuse from fuse box.
2. IMPORTANT: Prior to insertion of the live end connector, determine the
ground side of track (has indented groove on face and two internal copper
bars) and match it with the live end connector tabs (side of connector with
two metal tabs). The unit can only be connected if the grounds are aligned.
3. Position cover plate over ceiling junction box. Choose slots on cover plate
which align with junction box screws and mark cover accordingly. Pierce
cover at location of marks. Feed supply wires through cover and attach cover
to box with screws provided on the box.
4. Loosen set screw on dead end cap at the appropriate end of the track and
remove. Loosen set screw on connector.
5. Aligning the ground sides of track and connector, push connector into open
Flathead Phillips
Screwdriver Screwdriver
x1 Screws
2
Electrical Wire
Tape Cutters