MSA 10207312 Instrucciones De Uso página 8

Taping Instructions
!
WARNING!
• Always use the attachment point on the tool to secure the tool if one exists. Secure per the
Use Instructions included in this manual. Only use the alternative of taping the tool to the tool
tether if no attachment point is available.
• Use only the specified tape.
• Do not secure tools to Tool Tether Wristband, Carabiner Adjustable Loop, Carabiner Loop, or
Tool Tether Double Carabiner products using Tool Tether Tape. These products should only
be attached to tools with an attachment point.
• Tool Tether Tape must be replaced for any tool tether product that is taped to a tool and has
been subjected to fall arrest forces.
Failure to follow these warnings can result in serious personal injury or death.
Tool Weight
≤ 5 lbs (2.26 kg) 10207284
≤ 15 lbs (6.8 kg) 10207285
US
8
Tool Tether Part Number Tool Shaft Diameter
10207289
10207286
10207287
10207288
MSA Tool Tethers with Carabiners
≤ .75 up to 1.25 in (19-32 mm)
1.25-2.25 in (32-57 mm)
2.25-2.50 in(57-63 mm)
≤ .75 up to 1.25 in (19-32 mm)
1.25-2.25 in (32-57 mm)
2.25-2.50 in (57-63 mm)
Tape Length
≥ 20 in (51 cm)
≥ 25 in (64 cm)
≥ 32 in (81 cm)
≥ 32 in (81 cm)
≥ 38 in (97 cm)
≥ 50 in (127 cm)