eufy Security SoloCam L20 Guia De Inicio Rapido página 5

Mount SoloCam L20 / L40
SoloCam L20 / L40 can be mounted both outdoors and indoors.
1. Turn the knob of the mounting bracket counterclockwise to loosen
and disassemble it.
2. Place the mounting bracket against the wall. Drill holes with a 15/64
inch (5.99 mm) drill bit, then insert the anchors into the holes; anchors
are necessary for walls that are made out of hard materials such as
concrete, brick, or stucco.
06 EN
3. Firmly screw the knob of the mounting bracket into the mounting hole
of SoloCam.
4. Hold and screw SoloCam to the mounting bracket. Rotate SoloCam
to adjust the view and check it using the live stream which you can
access in the eufy Security app.
SoloCam L20 / L40 can be also installed on the ceiling. Follow the steps 1-4
mentioned above to install it.
Tips:
For troubleshooting, check Help on the eufy Security app. Refer to the
app page for LED indicator status.
EN 07