Conergy IPG T Serie Instrucciones De Servicio página 86

Conergy IPG T series
4 Transportation and assembly
Hot
air
150
mm
Cold
air
4.1: Necessary clearances for air circulation
Prerequisites for the ambient air to cool the inverter:
| Install the inverter upright.
| Do not install any equipment which generates warm
exhaust air above or below the inverter. Do not install string
inverters on top of each other.
| Do not cover the front panel of the inverter.
| When installing in a control cabinet, make sure there is
sufficient air circulation.
Operating manual
510
mm
150
mm
23