Conergy IPG T Serie Instrucciones De Servicio página 99

5 Installation
Result
36
Risk of damage from incorrect crimping die!
| Only use crimping die D supplied by Wieland (article
number 05. 502. 2300. 0).
(2)
3. Place the contact socket (2) in the crimping die. Use the
positioning aid.
4. Guide the stripped wires into the contact socket.
5. Press the gripper together tightly.
6. Repeat the process for all wires.
The cable is crimped.
Connecting the solar power system cable
(5)
1. Push the connector plug (4) or connector socket (3) onto
the crimped cable (5). A Clicking noise confirms a correct
connection.
Operating manual
(4)
Conergy IPG T series