Conergy IPG T Serie Instrucciones De Servicio página 98

Conergy IPG T series
Tools required
| Gripper with appropriate crimping die. Take care to ensure
that:
| Only use crimping die D supplied by Wieland (article
number 05. 502. 2300. 0).
| Risk of damage from incorrect crimping die!
| Open-ended spanner (13 mm, 20 mm)
(–) (1)
(+) (1)
5.2: Wires with connector plug and socket
(1)
Stripped, non-crimped cable
(2)
Ferrule
(3)
Connector plug
(4)
Connector socket
Crimping the cable
1. Strip the cable to 25 mm.
The coupling connectors and bushing integrated in the
device are MCIV-compatible.
Material damage due to damaged wire strands
Damaged wire strands may break and heat up.
| Do not damage the wire strands.
2. Strip wires to 14 mm.
Operating manual
5 Installation
(2)
(2)
(–) (3)
(+) (4)
35