Din Rear-Mount; Installation Using The Screw Holes On The Side Of The Unit - Pioneer DEH-P80MP Manual De Instalación

Installation

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 9)
2. Fastening the unit to the factory radio mounting bracket.
(Fig. 10) (Fig. 11)
Factory radio mounting bracket
11
All manuals and user guides at all-guides.com
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fit-
ted), and tighten the screws at 2 places on each side. Use
either truss screws (5 × 8 mm) or flush surface screws
(5 × 9 mm), depending on the shape of the screw holes in
.
the bracket
10
12
Frame
Insert the release pin into the hole in
the bottom of the frame and pull out
to remove the frame.
(When reattaching the frame, point
the side with a groove downwards
and attach it.)
Screw 11
13
Dashboard or Console
Fig. 9
Fig. 10
Fig. 11