Stryker IsoTour Manual De Operación página 20

T T r r o o u u b b l l e e s s h h o o o o t t i i n n g g
P P r r o o b b l l e e m m
Kinked air hoses
Missed connection with air
hoses
Power loss, product does
not turn on
Power loss, while T T r r u u T T u u r r n n
is in use
Button not responsive
T T r r u u T T u u r r n n not shown on
screen
T T r r u u T T u u r r n n shown on screen
EN 16
S S c c r r e e e e n n
29:59
C C a a u u s s e e
Air hose is bent or an
obstruction in the hose may
cause air flow to be
compromised
T T r r u u T T u u r r n n was attempted but
you have a standard Model
(bottom cover is orange).
Air hoses is not connected
to the pump or the support
surface
Power cord not seated,
power cord unplugged from
outlet, or possible internal
damage
Unintentional or intentional
power loss. Turn bladder is
inflated.
Lock function active
Graphical user interface is
for the standard model, not
connected to a premium
I I s s o o T T o o u u r r bottom cover with
anchor straps
Graphical user interface
shows T T r r u u T T u u r r n n but you
have a standard Model
(bottom cover is orange).
R R e e c c o o m m m m e e n n d d e e d d a a c c t t i i o o n n
1. Make sure the hoses are
straight and air flow is not
obstructed.
2. Press the action button
next to the Alarm off icon
to reset the pump.
Contact sales support for
T T r r u u T T u u r r n n option
1. Make sure that the hoses
are seated all the way
onto the hose ports on
the pump or the support
surface.
2. Press the action button
next to the Alarm off icon
to reset the pump.
Make sure the power cord is
plugged into the product and
the outlet.
Pull the hose from the pump
or the support surface to
activate CPR. The bladder
deflates and returns the
support surface to a flat
position.
Press and hold the action
button next to the locked icon
for 2 seconds to turn off the
lock.
Check for kinked hoses.
Verify that you have premium
bottom cover (black).
Contact sales support for
T T r r u u T T u u r r n n option
Turn off the pump to reset
the pump features. Make
sure the air hose is
connected before you turn
the pump on.
2874-009-005 Rev A.0