Cleaning Of The Grill Plate; Installation; Packaging And Unpacking; Installation (Service Technician) - Bartscher Master 900 Serie Manual De Instalación, Uso Y Mantenimiento

Equipo multifunción eléctrico
Ocultar thumbs Ver también para Master 900 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
ENGLISH
6.3.

Cleaning of the grill plate

Follow the instructions below.
1. Remove the left over food from the grill plate
with a paddle (be especially careful when
cleaning chrome plates).
2. Grease the plate with fat soluble agent and
wait a few minutes.
3. Close the drain hole with a suitable plug.
4. Pour hot water on the grill plate and wait a few
minutes.
5. Remove the dip tray.
7.
PROBLEMS DURING OPERATION
GB
The information below is provided to recognize
and repair any failures that may occur when
operating the device.
Problem
The heating elements
do not heat up.
8.

INSTALLATION

8.1.

Packaging and unpacking

During
unloading
devicefollow
manufacturer placed directly on the packaging
and in this manual.
To lift and transport the product plan to use a fork
lift or stacker, and pay attention to even weight
distribution to avoid a risk of tilting of the
packaging (avoid excessive incline!).
When using the lifting equipment
pay attention to the mains cable and
feet position.
The electrical connection is not
correct.
Safety thermostats are on.
Damaged temperature
controller.
and
when
installing
the
information
from
6. Put a bucket under the drain hole.
7. Pull out the plug and wait until the water has
drained out.
8. Clean and dry the grill plate and the dip tray
thoroughly.
9. We recommend washing the accessories in
the dishwasher.
In order to protect the grill plate from
rust dry it thoroughly and cover it with a
protective layer of cooking oil.
Some of the failures can be repaired by the user,
others require thorough specialist knowledge.
Such problems may be solved exclusively by the
qualified personnel.
Cause
Check the electrical connection.
Reset the device (see special
section).
Replace temperature controller.
the
The packaging consists of the carton packaging
the
and wooden pallet. There are symbols printed on
the carton packaging that according to the
international
regulations to follow when loading and unloading,
transporting and storing the device.
THIS
SIDE UP
8
Solution
Contact the service company.
agreements
inform
about
CAUTION
KEEP DRY
GLASS
the

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bre92mb0296426

Tabla de contenido