Technoline WS 9900 Manual De Instrucciones página 20

Function keys of temperature station:
The Temperature Station has only four easy to use function keys.
C1 – SET key (Setting)

Press and hold for about 3 seconds to enter the Manual setting
mode.
C2 – + key (Plus)

To make adjustment for time setting.
C3 – MIN/MAX key (Min/ Max temperature)

Used to toggle between the minimum and maximum recorded
readings of indoor & outdoor temperature.

Press and hold to reset minimum and maximum record when min
or max record is shown.
C4 – CH key (Channel)

To toggle between the Outdoor sensors 1, 2 and 3 (if more than 1
sensor is used)
Manual setting:
12/24 hour time display setting and temperature unit (°C/°F) setting
User may choose to display the time in 12-hour or 24-hour mode:
Note:
When the time display is set as 12-hour mode, the temperature unit will
be fixed to F; when the time mode is in 24-hour, the temperature unit
will be fixed to C.
1. In normal display mode, press and hold the set key for about 3
seconds. The "12h" or "24h" digit will be flashing.
2. Press the + key to set the desired time display mode.
EN6