To Adjust The Seat; Battery Indication; To Apply And Release The Parking Brake - Husqvarna R112iC Manual De Usuario

• Connect the battery charger to a grounded mains
socket and to the product.
Note:
The product must be started to show the
state of charge.
CAUTION:
charger connected when the battery is fully
charged.

Battery indication

The battery indicator on the display shows the state of
charge when the product is activated. When the charger
is connected and the product is activated the display
shows a charge animation. When battery is fully charged
and the charger is connected, all 4 battery LED lights
are solid.
1
LED lights
All 4 LED lights are solid.
LED light 1–3 are solid.
LED light 1–2 are solid.
LED light 1 is solid.
18
Do not keep the battery
2 3 4
State of charge
The battery is 76%–100%
charged.
The battery is 51%–76%
charged.
The battery is 26%–51%
charged.
The battery is 0%–25%
charged.
When the battery is low, the first LED light flashes and
the blades stop to save power. If the product has 0%
battery, the first LED light and the warning indicator flash
together.
Note:
If the product is used in cold conditions the
operation time can be decreased.

To adjust the seat

• The seat can be tilted forward.
• To adjust the seat forward and rearward, loosen the
bolts below the seat. Move the seat to the required
position and tighten the bolts.
To lift and lower the cutting deck
• To lift the cutting deck to transport position, pull the
lift lever rearward. If the motor is on, the blades stop.
• To lower the cutting deck to mow position, push the
lock button and move the lift lever forward. If the
motor is on, the blades start to rotate.

To apply and release the parking brake

The parking brake pedal and the lock button for the
parking brake is on the left side of the steering column.
1263 - 006 - 27.04.2022