Broan Elite E60000 Serie Instrucciones De Instalación página 8

5. CHOOSE THE OPENING(S)
Remove the knockout(s) for the chosen opening(s) (horizontal at the back of the hood or vertical on top). See illustrations below.
V
ERTICAL DISCHARGE
H
ORIZONTAL DISCHARGE
NOTE: For ducted installation only.
Punch out the appropriate electrical knockout
hole on top (A) or back (B) of the hood.
Install the wire clamp (included in parts bag).
NOTE: For a non-ducted installation, punch
out the back electrical knock-out (B).
6. REMOVE FILTERS AND THE GREASE DRIP RAIL
A. Remove tape on filters.
Remove filters from hood and set aside.
NOTE: It is recommended to start with the
center one.
B. Remove tape on grease drip rail (1).
Lift out grease drip rail and set aside.
7. REMOVE THE ADAPTER
Remove the adapter (1), or adapter/damper, taped inside the hood.
All manuals and user guides at all-guides.com
(INTERNAL BLOWER(S) HOOD ONLY)
1
1
HR0021
A
HD0250
A
HD0243
(INTERNAL BLOWER HOODS ONLY)
- 8 -
2
2
B
1
HD0287
3
3
B
1