DeWalt DWH052 Manual De Instrucciones página 7

All manuals and user guides at all-guides.com
4. Place the bracket (C) onto the front housing of tool and wrap the
adjustable strap (D) around the tool.
5. Pull the adjustable strap (D) tight and hook onto bracket hook
(G) to secure in place.
FIG. 4
C
D
6. Place the dust extraction system hose (B) onto the bracket (C)
allowing enough length of hose to ensure sufficient movement
of the nozzle along the length of the chisel when in use.
NOTICE: The chisel must not extend more than 2.4" (60 mm) or
less than 0.9" (25 mm) from the nozzle of the dust extractor vacuum.
The dust extractor vacuum must be a minimum of 1.97" (50 mm)
from the tool holder as shown.
FIG. 5
C
D
7. Pull adjustable strap tight over hose and hook to the bracket
hook (H) to secure in place.
G
Ensure the bracket, hose and adjustable strap are completely
secured to tool.
Attach Dust Extraction System to Dust
Extractor Vacuum (Fig. 1, 6, 7)
WARNING: Use only power tools recommended by D
this attachment. For more information about D
compatible with this attachment, please contact your local dealer,
call 1-800-4-D
dewalt.com.
5
0.9–2.4"
(25–60 mm)
B
0.9–2.4"
(25–60 mm)
WALT power tools
E
WALT (1-800-433-9258) or visit our website www.
E
1.97"
(50 mm)
1.97"
(50 mm)
WALT with
E