Calibration Interval - KPS -LX30LED Manual De Funcionamiento

• The light meter should be turned off before replacing batteries.
• If the meter is not to be used for a long time, take out the batteries.
• In case the meter is polluted due to battery leak, the meter should be sent by
post to the manufacturer for cleaning and checking.
• Use batteries specified in technical data only.
cling, reuse and treatment.

8.4 Calibration Interval

In order to ensure the accuracy of the meter, periodic calibration should be
performed by our debugging personnel. It is recommended to make calibration • For disposal of used batteries, follow existing specifications on battery recy-
every year. If the meter is in frequent use or used in poor environments, the
calibration interval should be accordingly shorten. If the meter is less used, the
calibration interval may prolong to three years.
Notice
KPS-LX30LED • Digital light meter
42