Auto Power Off - KPS -LX30LED Manual De Funcionamiento

KPS-LX30LED • Digital light meter
6. AUTO POWER-OFF
If there is no action on keys of the KPS-LX30LED for a long time, the meter will
automatically power off about 10 minutes later.
Figure 5-6-1
7. TECHNICAL DATA
batteries)
• Temperature range:
- Operation: -10~50ºC, max 80% HR (non-condensed)
- Storage: -10~50ºC, max 80% HR (non-condensed) (removing
• Sampling rate: ≥2 times/sec.
• Display: 3½ digits, max reading of 1999, with analog bar display
• Sensor: silicon photoelectric diode
• Measured spectral range: 320~730nm
• Measurement ranges: Lux - 0~200000 / Fc - 0~20000 / CD 999900
• Operating environment: indoor use
• Height: 2,000m highest
• Battery life: approx. 200 hours
• Power supply: 1×9V, IEC 6LR61
• Dimensions (H×W×D): 190 mm×89 mm×42.5 mm
• Weight: approx. 360 g without batteries; approx. 420 g with batteries
• Cosine angle deviation characteristics
• Accuracy:
- ±3% (calibrated with incandescent lamps in 2854ºK)
- ±6% other visible light source
Figure 5-6-2
39
Figure 5-6-3