Safety
Precautions
To prevent injury and property damage, follow these instructions.
Incorrect operation due to ignoring instructions will cause harm or damage, the seriousness of which is
indicated by the following symbols.
WARNING
CAUTION
The following items are classified by these symbols.
Use in the power plug
properly.
• Otherwise, it may cause electric
shock or fire due to heat
generation.
Do not modify power cord
length or share the outlet
with other appliances.
• Doing so may cause electric shock
or fire due to heat generation.
Do not allow water to run
into electric parts.
• Doing so may cause failure of
machine or electric shock.
Do not use the socket if it is
loose or damaged.
• Doing so may cause fire or
electric shock.
Do not use the power cord close to the
heating tools.
• Doing so may cause fire and electric shock.
All manuals and user guides at all-guides.com
Precautions
This symbol shows the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.
Never Do This
Always Do This
WARNING
WARNING
Do not operate or stop the
unit by inserting or pulling
out the power plug.
• Doing so may cause electric
shock or fire due to heat
generation.
Do not operate with wet
hands or in damp
environment.
• Doing so may cause electric
shock.
Always install air leakage
breaker and a dedicated
switching board.
• No installation may cause fire
and electric shock accident.
Do not open the entrance
during operation.
• Doing so poses the risk of
electric shock.
3
Do not use a damaged or
unspecified power cord.
• Doing so may cause electric shock or fire.
• If the supply cord is damaged, it must be
replaced by the manufacturer service
agent or a similarly qualified person in
order to avoid a hazard. (Y attachment)
Always plug into a
grounded outlet.
• No grounding may cause electric
shock (See Installation Manual).
Unplug the unit if strange
sounds, odors, or smoke
come from it.
• It may cause fire and electric
shock accident.
Keep firearms away.
• Using firearms in proximity to this
unit poses a fire risk.
Do not use the power cord near flammable
gas or combustibles such as gasoline,
benzene, thinner, etc.
• Doing so may cause an explosion or fire.