Intended Use - BGS technic 65700 Manual Del Usuario

INTENDED USE

Puller set to remove bolted Windscreen Wiper Arms, especially for those, which have become rusted
or corroded onto the drive shaft. Stubborn and deep-seated Wiper Arms may be quickly and easily
removed using Puller Set. Wiper Arms with integrated Screen-Wash nozzles - e.g. VW-Audi, BMW
etc. on the rear window - can be easily removed by using the Slide hammer included in the Set. Wiper
Arms with central holes may be removed by using the Pressure Spindle. Those Wiper Arms with no
central hole require the Pressure Bolt to be used with the Pressure Adaptor supplied.
EXAMPLE
EXTRACTOR ADAPTER
Pull off a wiper arm with an extractor gripper.
SLIDING HAMMER
Pull off a wiper arm with the sliding hammer.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed