Cam Screw - Sauder North Avenue 420035 Instrucciones De Ensamblaje

Step 3
Push two HIDDEN CAMS (3) into the TOP MOLDING (F).
å
Fasten the TOP MOLDING (F) to the ENDS (B and C).
å
Tighten the HIDDEN CAMS.
NOTE: Be sure the follow the diagram to the right on how
å
to tighten the HIDDEN CAM.
NOTE: Be sure the WOOD DOWELS insert into the holes
å
in the ENDS.
420035
F
3
The arrow must point
B
toward the edge of the
board and CAM SCREW.
www.sauder.com
1
3
The arrow must
point toward the
edge of the board.
C
This surface will be
facing out of the part
after it is pushed in the
TOP MOLDING (F).
2
3
Page 7