Ariston Net / Chaff Olink Installation - CHAFFOTEAUX Ariston 65114915 Instrucciones De Instalación

GB
5. INSTALLING THE ARISTON NET / CHAFFOLINK
The following section describes how to install Ariston Net / Chaff olink. We
recommend that you begin the procedure by connecting the gateway with the
Ariston/Chaff oteaux heating product, then by connecting it to the temperature
regulation accessory. You must fi rst complete all the previous steps before you
can connect the gateway to the power supply and mount it on the wall using
the wall mounting plate.
WARNING!
Installation should be performed by a qualifi ed technician.
Before installing, disable the power supply to the boiler. The BridgeNet BUS
cable is polarised: to avoid problems with system start-up, check the polarities (T
with T, and B with B) between all system components.
5.1 Types of possible installations
For the sake of argument only, in the following paragraph there are some of
the main feasible system schemes using Ariston Net / Chaff olink and other
accessories that are already within the Ariston/Chaff oteaux product range, as
well as the types of services that can be activated using these confi gurations.
The term "Remote Diagnostics" (RD) means the service directed to the Technical
Assistance Centre, through which all the product support functions of Ariston
Net / Chaff olink are enabled remotely.
The term "Remote Control" (RC) means, conversely, the service directed to
end users, through which they can use the smartphone App or web portal to
monitor and set their Ariston/Chaff oteaux products.
For more information and details about the installation diagrams shown below,
we would ask you to contact the Ariston/Chaff oteaux Technical Consultancy
Centre.
\ 27