5.4 Connection of the Gateway
with the Ariston/Chaff oteaux Room Sensor
Once
the
installation
temperature regulation accessory
is complete, you can make the
connection with the Ariston Net /
Chaff olink Gateway.
Proceed with the connection as
follows:
1. Open the front panel of the
gateway by unscrewing the two
screws on the bottom of the
appliance (1) slightly turn the
cover towards yourself (2) and
pull it downwards (3).
2. Connect the other end of the
bipolar cable that is already
connected
Chaff oteaux Room Sensor to
a BridgeNet Bus input on the
Gateway,
using
supplied connectors.
of
to
the
Ariston/
one
of
220V
BUS BUS
TA1
B
T B
Gateway connection to the Ariston/Chaff oteaux Room Sensor accessory
the
1.
the
T
3.
2.
1.
GB
\ 31