Publicidad
Step 13
Refer to the enlarged diagram to identify the parts on the
å
HINGES and HINGE BRACKETS.
The DOORS may need some adjustments. Follow the text
å
below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), loosen the
å
mounting screw several turns, then turn the adjusting screw in
or out. Tighten the mounting screw after making adjustments.
To adjust the DOORS up and down (vertical), loosen both
å
screws that fasten the HINGE BRACKETS to the END. Move the
DOORS up or down to the desired location. Tighten the screws
after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting
å
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
Adjusting screw (horizontal)
www.sauder.com/services
All manuals and user guides at all-guides.com
Mounting screw (depth)
(vertical adjustment)
404975
Page 17
Publicidad
