BQS BTG 0123 Manual De Uso página 28

15. Do not disassemble, modify, or add any piece to the child seat or harness, as
this would seriously affect its basic functioning and the safety that the child
seat provides.
16. The safety seat must remain installed in the vehicle with the safety belt, even if
the child is not seated in the child seat. The child must never be left unattended
while seated in the safety seat, not even outside the vehicle.
17. Keep the safety seat away from corrosive products.
18. Do not use anchor points that are not listed in the instruction manual and
indicated on the seat.
19. The seat should be replaced after undergoing the violent stresses associated
with an accident.
20. The manufacturer guarantees the quality of its products, but not the quality of
second-hand products or products belonging to other companies.
21. Instruction illustrations are for informational purposes only. The child restraint
system may contain small differences compared to the photographs or images
in the instruction manual. These variations do not affect its certification under
ECE Regulation R44/04.
22. Ensure that any strap or belt that holds the child is not bent or twisted and
keeps tightened. Act under the same criteria with the vehicle belts that serve
as a restraint for the chair.
1. OVERVIEW
A. Headrest.
B. Seat cover.
C. Harness shoulder straps.
D. Harness shoulder protectors.
E. Harness buckle.
F. Abdominal belt guide group
0+/1.
G. Recline lever.
H. Harness adjuster strap.
I. Harness adjuster button.
28
J. Reducer cushion.
K. Diagonal belt guide group
0+/1
L. Shoulder
adjusment slots.
M. Installation slot (group 1).
N. Metal harness connector.
O. Diagonal and abdominal belt
guide group 1/2/3.
P. Diagonal belt guide group 2/3.
Q. Recline adapter.
straps height
BTG 0123