Test The Automatic Transfer Switch; Controls - Briggs & Stratton 071210 Manual Del Usuario

7
• A-A and B-B wire range 12 - 22 AWG. Torque 12 lb/in.

Test the Automatic Transfer Switch

WARNING
Shock Hazard. Equipment contains high voltage
that could cause electrocution resulting in death or serious
injury.
• Testing must only be performed by qualified personnel.
Turn the Service Disconnect Circuit Breaker to
the OFF position. The system's automatic sequence will
initiate. To return to utility power, turn the Service Disconnect
Circuit Breaker to the ON position.

Controls

Other than a manual override lever, there are no operator
controls because this is an automatic transfer switch.
The manual override is to be used only by licensed
professionals. To get Information on the lever, call Technical
Service at 800-732-2989.
11