Snapper ESXDCS82 Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83
EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
„ Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to power source and/or battery
pack and when picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energizing power tools
that have the switch on invites accidents.
„ Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
„ Do not over-reach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
„ Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
„ if devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
POwER TOOL USE AND CARE
„ Do not force the power tool. Use the
power tool for the application. The correct
power tool will do the job better and safer
at the rate for which it was designed.
„ Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
„ Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
„ Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
English (original instructions)
changing
accessories,
„ Maintain
power
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
„ Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
„ Use the power tool, accessories and
tool bits etc.in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
BATTERY TOOL USE AND CARE
„ Ensure the switch is in the off position
before inserting battery pack. Inserting
the battery pack into power tools that have
the switch on invites accidents.
„ Recharge
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
„ Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
„ when battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or fire.
„ Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with plenty of soap and water. If liquid
contacts eyes, immediately seek medical
help. Liquid ejected from the battery may
cause irritation or burns.
2
tools.
Check
only
with
the
for
charger

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1696774

Tabla de contenido