Product Versions; Scope Of Delivery; Special Accessories; Transport Information - Beissbarth TESLA VLH 2140 Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
5.3

Product versions

The VLH 2140 is available in the following versions:
Part no.
Total height
1 692 821 447
3670 mm
These instructions are intended for version
1 692 821 447 of VLH 2140.
5.4

Scope of delivery

Denomination
lift VLH 2140, complete
Original operating manual
Test book
CE statement
Operating instructions for Holzmann LSR
10HQ
5.5

Special accessories

Information on special accessories (e.g. special support
arms or mounts) can be obtained from your Beissbarth
franchized dealer.
5.6

Transport information

The VLH 2140 is normally supplied as a single packing
unit on a pallet. For dimensions and weight of the
packaged unit, see table:
Part no.
Size
1 692 821 447
3810 x 1155 x 450 mm
(12.5 x 3.8 x 1.5 feet)
In-house transportation
The user must provide a forklift truck for in-house
transportation. The center of gravity and lashing points
are marked on the packaging.
Fig. 2:
Center of gravity of packaging (example)
Beissbarth GmbH
5.7
The lifting platform is only to be started up by Beissbarth
customer service or an authorized service agent. Initial
Support arms
commissioning of the lifting platform is described in the
Long support
installation instructions. Acceptance must be performed
arms
by a qualified person after initial commissioning.
5.8
!
The lifting platform is not to be erected outdoors.
At least weather-proof roofing is required.
Part no.
See
5.8.1
rating plate
Refer to Section 10.5 for lifting platform dimensions.
1 692 826 073
There must also be a clearance of at least 1 meter
1 689 977 088
between the lifting platform and fixed elements
1 692 826 072
(e.g. wall) in all lifting positions.
There must be sufficient space at the ends of the lifting
platform for driving vehicles on and off.
5.8.2
The user must have the following work performed
before erecting the platform:
R
Construction of the foundation following
consultation with Beissbarth customer service or an
authorized service agent.
R
Routing of the wiring to the installation location.
The user must provide fuse protection for the
connection.
Weight
i
737 kg (1625 lb)
Refer also to the corresponding information in the
commissioning instructions.
Company obligations | VLH 2140 | 27

Set-up and initial commissioning

Preparation by the user

Space requirements

Foundation and connections

1 692 826 073
en
|
2017-03-29

Publicidad

Tabla de contenido
loading

Tabla de contenido