Standard Accessories - HIKOKI M 12VE Instrucciones De Manejo

English
5) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
ROUTER SAFETY WARNINGS
1. Hold the power tool by insulated gripping surfaces
only, because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
3. Single-hand operation is unstable and dangerous.
Ensure that both handles are gripped fi rmly during
operation. (Fig. 18)
4. The bit is very hot immediately after operation. Avoid
bare hand contact with the bit for any reason.
5. Use bits of the correct shank diameter suitable for the
speed of the tool.
DESCRIPTION OF NUMBERED ITEMS
(Fig. 1–Fig. 18)
Handle
Lock pin
Wrench
Loosen
Tighten
Stopper pole
Scale
Depth indicator
Wing bolt
Stopper block
Loosen the lock lever
Nut
Threaded column
Cut depth setting screw
Template guide
Screw
Bit
Template
Parallel guide
Guide plane
Guide bar
Wing bolt (A)
Dial
Separate
Router feed
Workpiece
Rotation of bit
Dust collector
Knob nut
6
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
M12VE: Router
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Disconnect mains plug from electrical outlet
Class II tool

STANDARD ACCESSORIES

(1) Parallel Guide ..............................................................1
(2) Template Guide ...........................................................1
(3) Wrench ........................................................................1
(4) Wing Bolt (A) ...............................................................2
(5) Lock Spring .................................................................2
(6) Dust Collector Set ........................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
○ Woodworking jobs
chamfering.
SPECIFICATIONS
Model
Voltage (by areas)*
Power Input*
Collet Chuck Capacity
No-load speed
Main Body Stroke
Weight (without cord and
standard accessories)
* Be sure to check the nameplate on product as it is subject
to change by areas.
centered on grooving
M12VE
(110 V, 230 V)
2000 W
12 mm or 1/2"
8000–22000 min
65 mm
5.4 kg
and
-1