Brother Innov-is Quattro 6000D Guia De Instalacion página 8

If the following error message appears
• Verify that the CD key and internal machine
identification number (No.) have been entered
correctly, and then repeat the procedure from step
c
. To close the message, click OK.
• The CD Key is valid for use with only one
designated internal machine identification number
(No.).
Check that the CD key has been entered correctly,
and then repeat the procedure from step
close the message, click OK.
• Check the Internet connection, and then click
Certify again. To close the message, click OK.
6
All manuals and user guides at all-guides.com
c
. To
j
Write down the 8-digit Certification Key that
appears.
Note
• After upgrading the sewing machine to KIT
Certification Key must be entered in the sewing
machine Settings screen.
k
Click Finish.
If the latest program has already been
installed in the machine
l
Skip the steps to
procedure from step
l
While pressing the "Automatic Threading"
button, turn the sewing machine on.
Use USB media or a computer to install the upgrade
II
application for KIT on the sewing machine.
If USB media is to be used, refer to the instructions that
follow.
computer
If a is to be used, refer to page 8.
II
, the
q
, and then start the
r
.