Replacing Main Burners - Weber Summit 56219 Guia Del Propietario

Asador de gas licuado de propano
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

replaCinG main burners

A) Your Summit
®
gas grill must be off and cool .
B) Turn gas off at source .
C) Disconnect gas supply .
D) Remove cooking grates .
E) Remove Flavorizer
®
bars .
F) Remove smoker box (if included in your model) .
remove Control panel
G) Parts required: Phillips screwdriver and a towel .
a) Remove the burner control knobs (1) .
b) Open both doors and place a towel on top of the doors .
this will protect the control panel and tops of the doors from getting
scratched on the next step.
c)
Remove the screws from the underside of the control panel with a Phillips
screwdriver (2) .
d) Tilt the conrol panel forward and lift up and away from the grill (3) (For Summit
models with LED features: Be careful not to break or disconnect the wires for
the control panel LED's) .
e) Place the control panel on the towel covering the door assemblies (4) .
2
H) Remove the two screws that secure the manifold to the cookbox . Pull manifold
assembly out from the manifold frame (5) .
I)
Pull the selected burner(s) tube(s) from manifold frame and replace with a new
burner tube (6) .
All manuals and user guides at all-guides.com
mAINTENANcE
®
3
the grill illustrated
may have slight
differences than the
model purchased.
6
7
1
4
5
6
WWW.WEbER.com
®
25

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Summit 4207121001

Tabla de contenido