Replacing Main Burners - Weber 300 Guia Del Propietario

30

REPLACING MAIN BURNERS

®
1) Your Weber gas barbecue must be OFF and cool.
2) Turn gas OFF at source.
3) Open lid and remove the cooking grates.
4) Remove the 1/4 x 20 inch screw that holds the burner tube to the cookbox(x).
5) Rotate the outside burner 90º. Slide and lift burner away from burner orifice and
remove from cook box.
6) Repeat this procedure for the inside burner(y).
CAUTION: Care must be taken when removing or reinstalling
burner tubes. Do not force or bend the gas lines that connect
the burner tubes to the control valve.
7) To reinstall the burners, reverse 4) through 7).
CAUTION: The burner openings(a) must be positioned
properly over the burner orifices(b).
Check for proper assembly before fastening Burner tubes in place.
WARNING: After reinstalling the burners, the gas
connections should be leak checked with a soap and water
solution before using the barbecue. (See Step: "Check for
gas leaks.")
MAINTENANCE
x
y
(a)
(b)