Start Up Instructions - Garland Roll&Comb 302 W-V20 Manual De Instrucciones

English

5. START UP INSTRUCTIONS

5.1. LIST OF MATERIALS
This machine includes the following elements that you
will find inside the box:
• Machine
• Catcher
• Top handle
• Lower handle
• Screw for holding tubes
• Connecting wing nut
• Battery
• Charger
• Instruction manual
Remove carefully all the elements from the box and
make sure that all listed parts are included.
Due to the quality controls done at the factory it is
highly improbable that your machine has any faulty
part or that any elements are missing. If you find any
damaged part or there are any elements missing,
do not use the machine until the problem has been
solved or you have been given the missing parts.
Usage of the machine with defective or missing parts
is dangerous and could result in personal injuries.
5.2. MOUNTING
1. Insert the upper tube into the lower tube and
connect using the screw and the wing nut.
All manuals and user guides at all-guides.com
2. Insert the lower handlebar (7) in their respective
seats and tighten the screws.
5.3 CATCHER INSTALLATION
5.4 BATTERY INSTALLATION
26/84