HoMedics BPW-715 Manual Del Usuario página 19

3. When the measurement is completed, the cuff will deflate
entirely. Systolic pressure, diastolic pressure, and pulse will be
shown simultaneously on the LCD screen. The measurement
is then automatically stored into memory.
NOTE:
• If the monitor detects Excessive Body movement during the
measurement, EE "error" will display on the screen. Keep
arm steady and measure again.
• This monitor will reinflate automatically if the system detects
that your body requires more pressure for measurement.
• This monitor automatically turns off approximately 1 minute
after last operation. You may also press the "START/STOP"
button to turn the unit off.
• To interrupt the measurement, you may press the "START/
STOP" button (recommended), the "MEMORY" button or
"Date/Time Set"
after a button is pressed.
t
buttons. The cuff will deflate immediately
18