Applying The Cuff - HoMedics BPW-715 Manual Del Usuario

APPLYING THE CUFF

1. Remove all watches, wrist jewelr y,
etc. prior to attaching the wrist
monitor. Clothing sleeves should
be rolled up and the cuff should
be wrapped around bare skin for
correct measurements.
2. Apply cuff to left wrist with palm facing
up (Fig. 1).
3. Make sure the edge of the cuff is about
¼"–½" (1cm-1.5cm) from the palm facing
up (Fig. 2).
4. In order to ensure accurate measurements,
fasten the hook and loop strap securely
around your wrist so there is no extra
space between the cuff and the wrist.
If the cuff is not wrapped tight enough,
the measurement values will not
be accurate.
5. If your physician has diagnosed you
with poor circulation in your left arm,
place the cuff around your right wrist
(Fig. 3).
NOTE:
• This device should not be used if your
wrist is wounded or injured.
• If it is not possible to use the cuff
on your left wrist, it can also be
used on your right wrist. However,
all measurements should be made
using the same wrist.
14
Fig. 1
Fig. 2
Fig. 3