Operation; Trailer Tie Downs For Rear; Daily Inspection - Textron RANSOMES JACOBSEN HR3806 Manual De Seguridad Y Operacion

7

OPERATION

7.1 DAILY INSPECTION

1. Perform a visual inspection of the entire unit, look for signs of wear, lose hardware and missing or
damaged components. Check for fuel and oil leaks to ensure connections are tight and hoses and
tubes are in good condition.
2. Check the fuel supply, radiator coolant level, crankcase oil level and air cleaner indicator. All fluids
must be at the full mark with the engine cold.
3. Remove all grass debris from the machine.
4. Make sure all cutting units are adjusted to the same height of cut.
5. Check all tyres for proper inflation.
6. Test the operator presence and safety interlock system.
7. Remove all grass debris from the Pre-Cleaner.

7.2 TRAILER TIE DOWNS FOR REAR.

.
Two tie down loops are provided on the rear bumper
to enable the machine to be securely attached to a
trailer for transportation.
All manuals and user guides at all-guides.com
CAUTION
The daily inspection should be performed
only when the engine is off and all fluids
are cold. Lower implements to the
ground, engage parking brake, stop
engine and remove ignition key.
RANSOMES HR3806 Series: DZ
SAFETY AND OPERATORS MANUAL
A
GB-17