Power Supply - Festo CPX Serie Breve Descripción

All manuals and user guides at all-guides.com

3.7 Power supply

The power supply for the device is supplied via the inter-
linking block.
– The device is supplied via the operating voltage supply
for electronics and sensors.
– The load voltage supply for valves and digital outputs
is not needed.
This means that the device can be combined with all inter-
linking blocks.
– Interlinking block without supply
– Interlinking block with system supply
– Interlinking block with additional power supply if the
module needs an additional power supply to the right
of the CPX-CEC-... but there is not enough space for it.
Note
Further information on the power supply and interlink-
ing blocks can be found in the CPX system manual
P.BE-CPX-SYS-...
Festo CPX-CEC-Z6 1407b English 25