Power Supply - Festo CPVSC-DN Breve Descripción

Power supply

Rated value
Tolerance
Residual ripple
Pin 1: electronics
(and CP sensors)
Pin 2: Valves
(and CP outputs)
Protection against
electric shock
Electrical isolation
Field bus interface:
opto−uncoupled from the power supply connection
Power supply connection:
pin 1 electrically isolated from pin 2
Detailed information about the CPVSC−DN can be found in
the manual P.BE−CPASC−CPVSC−DN−... .
26
24 V DC (protected against incorrect polarity,
fused internally, automatic restart)
20.4 ... 26.4 V
4 Vpp (within tolerance)
Current consumption: max. 200 mA
+ current consumption of the sensors
Current consumption: Sum of all switched−on
CP solenoid valves (see manual CP pneu
matics") and CP outputs (if not with their
own power supply)
By connection to a PELV power unit
(Protected Extra Low Voltage)
(protection against direct and indirect
contact as per EN 60204−1/IEC 204)
Festo CPVSC−DN 0404NH English