Installation And Operation; Installation - Bartscher 101923 Manual De Instrucciones

5. Installation and operation

5.1 Installation

Positioning

Unpack the device and remove all package materials according to the valid
environment protection regulations.
CAUTION!
Never remove the nameplate and warning signs from the device.

Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.

Never place the device on an inflammable surface.

Place the device on the surface that supports the weight of the device also
when fully loaded (min. 25 kg).

Leave enough space around the device to ensure efficient operation and to be able
to attach or remove the mixing bowl or stirrers.

To protect the device from overheating, do not cover the ventilation slots at the
rear panel.

Never put the device in a moist or wet area.

Place the device so that the plug is easily accessible so as to quickly disconneet the
device if the need arises.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!

The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
- 32 -