Color System - Bang & Olufsen BeoVision 5 - 42 US Manual

Picture adjustments
Black level
Grey level
White level
If the old EEPROM is defective, replace the EEPROM and write the above mentioned
values into the new EEPROM.
Some of the items in the PICTURE ADJUSTMENTS menu are not used for adjustments:
PANORAMA [ON/OFF] Is default ON which shows the largest picture in
Format 1. If set to OFF a 4:3 picture is shown in Format 1.

COLOR SYSTEM

[NTSC/NTSC/PAL-N/M] Is default NTSC. NTSC/PAL-N/M is used if
the TV has crystals for both NTSC and PAL-N/M.
TEMP [COL/MID/WRM] Is used to select the color temperature in the
plasma display.
BRIOF & CONOF Offset parameters for brilliance and contrast. Used to make the
picture on the plasma display look right, when the parameters
in the user picture menu are set to mid position.
BLUE STR Is default OFF. Used to move the white point towards the blue
color.
Connect a DVD to the DVD input in the US-box. Load test DVD part no. 3540542
and set the TV to receive the signal. Play track 8.5 (Pluge pattern).
Set Brilliance, Color and Tint to their mid position.
To avoid image burn-in on the plasma display do not allow still pictures for an
extended period of time.
Enter Service mode, press MENU MENU 0 0 GO.
Select the Monitor line and press GO. Now the Monitor service menu appears.
Select the Picture adjustments line in the Monitor service menu and press GO.
Check that the TEMP is set to MID.
When the cursor is placed on the first item press GO. Now a sub menu appear.
l n
Press or to adjust. Press
GO to store the adjustments.
Cover the auto contrast (placed together with the STBY/ON LED on the upper
right-hand side of the TV) with e.g. a black cloth. Hold the Beo4 remote control
below the cloth for operating the TV.
Select BRIOF in the Picture adjustments menu.
If grey fl ecks are visible in the black part of the grey scale adjust BRIOF until the
grey fl ecks just disappear (it must be watched in a dark room). If not adjust BRIOF
until grey fl ecks appear and then adjust downwards until they just disappear.
Adjust RCT and BCT to correct grey level in the grey scale.
Adjust RDR and BDR to correct white level in the grey scale.
Readjust the Grey level if necessary
Adjustments, English
p
to step to the next sub menu. When fi nished press
5.7